BEST INDOOR AIR QUALITY                                                                                                                                                                  authorized dealer of ATMOSAIR products
Virtually eliminate: Odor, mold, dust, pollen, bacteria, virus  
  Breathing is believing..                  

                                                                               
Authorized ATMOSAIR dealer
REASONS TO BUY   


Bi-Polar Ionization Beneficial Effects

Particle Reduction

*Particles are neutralized and fall out of the breathing range


Odor Control

Unpleasant organic odors (trash, mildew, cooking, dirty laundry, fresh paint or varnish)        are instantly eliminated


VOC (Volatile Organic Compound) Control

Complex hydrocarbon chains are broken down into simpler harmless elements


Mold, Bacteria, Viruses, Germs, etc. (Microbials)

*Reproductive cycle is interrupted and colony forming units decrease


Energy Conservation

* Industrial applications: ionization provides a cost effective solution to control

   exhaust emissions.

*Commercial applications: less introduction of outside air is needed to provide comfort and 

  air quality, lowering heating and cooling costs.


Static Electricity Reduction

Bi-Polar Ionization neutralizes all charges in the air and eliminates static electricity


All Natural Process

No chemicals or harmful by-products




return to top


Particle Reduction

• The bi-polar process causes oppositely charged ions to attract to

particles as well as particles attracting to each other.

• This will cause particles to decay out of the breathing range much

faster than they ordinarily would.

• The particles are displaced from the breathing range by the

ionization process. The particles that get to the HVAC filters will still

do so, but the filter will operate more efficiently since it will trap these

now larger particles.

• The particles that are generated from the floor that ordinarily never

make to filters are decayed back to floor and stay out of the

breathing range.

return to top



VOC (Volatile Organic Compound) Control

• VOC’s are made up of complex chains of hydrocarbons.

• VOC’s are typically off gasses from many sources including, building

materials, furnishings, people and their activities, combustion sources,

chemical storage, etc.

• VOC’s and CO2 levels are the reason outside air is required to be introduced

into buildings, to control these elements by diluting them.

• VOC’s commonly cause odors and irritations and can cause a sick building

syndrome situation.

• Bi-polar ionization interacts with the hydrocarbon chain and breaks down it’s

structure, turning something complex and irritating or toxic into simple

elements like CO2 and H2O

• The VOC isn’t diluted or masked but is broken down and eliminated.

return to top



Micro-Organisms (Bacteria, Viruses, Molds)

• These are living organisms that are detrimental to health.

• Like all living organisms they need food and water and seek to

reproduce and spread.

• Bi-Polar ions interact with oppositely charged elements and strip

hydrogen molecules from micro-organisms.

• This make the cell unable to split and divide and reproduce.

• This will reduce bacteria colony forming units and reduce mold spore

counts.

• The effect can be both preventative and curative.

return to top



Energy Conservation

• AtmosAir system use little energy (the 500F with a 10,000 cfm capacity only

uses 45 watts) and also do not restrict airflow or cause meaningful static

pressure drop in a duct system.

• In a study of existing buildings by Aircuity Inc, who manufacturers air testing

equipment, 54% were over-ventilated to ASHRAE 62 during occupied hours

and 76% during non-occupied hours.

• Also the ASHRAE IAQ procedure allows for engineered systems where O/A

can go below the standard 62 ventilation rate if air purification is included.

• Not only will lowering outside air effect operating costs but tonnage load as

well when designing a new system.

• Less outside air also mean less introduction of particles and spores and

odorous elements from outside the building.

return to top



Static Electricity Control

• Bi-Polar Ions because the end result is a balance of negative and

positive charges neutralize static charges.

• This can range from annoying static shocks in winter to critical

control in a manufacturing environment.

return to top


return to top


SICK BUILDING SYNDROME

What Is Sick Building Syndrome?
Sick building syndrome (SBS) occurs when occupants of a building experience acute health effects that seem to be linked to time spent in a building, but no specific illness or cause can be identified. The complaints may be localized in a particular room or zone, or may be widespread throughout the building. Frequently, problems result when a building is operated or maintained in a manner that is inconsistent with its original design or prescribed operating procedures. Sometimes indoor air problems are a result of poor building design or occupant activities.

What Are the Symptoms of SBS?
Building occupants complain of symptoms associated with acute discomfort. These symptoms include headaches; eye, nose, and throat irritation; a dry cough; dry or itchy skin; dizziness and nausea; difficulty in concentrating; fatigue; asthma and sensitivity to odors. With SBS, no clinically defined disease or specific chemical or biological contaminant can be determined as the cause of the symptoms. Most of the complainants feel relief soon after leaving the building. SBS reduces worker productivity and may also increase absenteeism.

What Causes SBS?
While specific causes of SBS remain unknown, the following have been cited as contributing factors to sick building syndrome. These elements may act in combination or may supplement other complaints such as inadequate temperature, humidity or lighting.

  • Chemical contaminants from outdoor sources: Outdoor air that enters a building can also be a source of indoor pollution. Pollutants from motor vehicle exhausts, plumbing vents, and building exhausts (bathrooms and kitchens) can enter the building through poorly located air intake vents, windows, and other openings. Combustion by-products can also enter a building from a nearby garage.
  • Chemical contaminants from indoor sources: Most indoor air pollution comes from sources inside the building. For example, adhesives, upholstery, carpeting, copy machines, manufactured wood products, cleaning agents and pesticides may emit volatile organic compounds (VOCs) including formaldehyde. Research shows that some VOCs can cause chronic and acute health effects at high concentrations, and some are known carcinogens. Low to moderate levels of multiple VOCs may also produce acute reactions in some individuals. Environmental tobacco smoke and combustion products from stoves, fireplaces, and unvented space heaters all can put chemical contaminants into the air.
  • Biological contaminants: Biological contaminants include pollen, bacteria, viruses, and molds. These contaminants can breed in stagnant water that has accumulated in humidifiers, drain pans, and ducts, or where water has collected on ceiling tiles, insulation, or carpet. Biological contaminants can cause fever, chills, cough, chest tightness, muscle aches, and allergic reactions. One indoor air bacterium, Legionella, has caused both Pontiac Fever and Legionnaire’s Disease.
  • Inadequate ventilation: In the 1970s the oil embargo led building designers to make buildings more airtight, with less outdoor air ventilation, in order to improve energy efficiency. These reduced ventilation rates have been found to be, in many cases, inadequate to maintain the health and comfort of building occupants.

What Are the Solutions to Sick Building Syndrome?
Solutions to SBS problems usually include combinations of the following measures:

  • Increasing the ventilation rates and air distribution is often a cost-effective means of reducing indoor pollutant levels. At a minimum, heating, ventilating, and air conditioning (HVAC) systems should be designed to meet ventilation standards in local building codes. Make sure that the system is operated and maintained to ensure that the design ventilation rates are attained. If possible, the HVAC system should be operated to the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 62-1989. If there are strong pollutant sources, air may need to be vented directly to the outside. This method is especially recommended to remove pollutants that accumulate in specific areas such as restrooms, copy rooms, and printing facilities.
  • Removal or modification of the pollutant source is the most effective approach to solving a known source of an indoor air quality problem when this solution is practicable. Ways to do this include routine maintenance of HVAC systems; replacing water-stained ceiling tiles and carpets; banning smoking or providing a separately ventilated room; venting contaminant source emissions to the outdoors; using and storing paints, solvents, pesticides, and adhesives in closed containers in well-ventilated areas; using those pollutant sources in periods of low or no occupancy; and allowing time for building materials in new or remodeled areas to off-gas pollutants before occupancy.
  • Education and communication are important parts of any air quality management program. When everyone associated with the building, from occupants to maintenance, fully understands the issues and communicates with each other they can work more effectively together to prevent and solve problems